Skip to main content

MBG

MICROBUBBLE AND NANOBUBBLE GENERATOR

scroll down to learn more

Nanobubble technology is being incorporated into a range of applications across all industries.

Water treatment has always required the use of coagulation and flocculation chemicals, these are expensive and produce sludge during the liquid-solids separation. In some cases these chemicals actually hinder the treatment process.

The solution is to move away from these types of chemical treatment all together. The IGS Microbubble Generator is a non-chemical system that uses air (or any gas) to effect solid-liquid separation, thereby reducing the total suspended solids by more than 99%.

Microbubble Generators can be incorporated in all irrigation systems to provide nanobubbles for plant roots for improved growth, and keep irrigation equipment clean internally whilst in use.

RMA QA

Reduce the organic load in the water

The IGS Microbubble and Nanobubble Generator is able to reduce the organic loading considerably in the waste stream. Typical performances reductions of COD > 80% and BOD> 50%

Remove pollutants from
the water

The IGS Microbubble and Nanobubble Generator can easily be coupled with Ozone or Ultrasound for advanced oxidation performance to remove even more pollutants from the water.

Save money, chemicals, time & energy

Coagulation and flocculation chemicals are expensive and produce sludge through the liquid-solids separation. In some instances, these chemicals could further hinder the treatment process.

Nanobubble

What is a Nanobubble ?

Microbubbles and nanobubbles or ultrafine bubbles are tiny bubbles with a respective diameter of 10–50 μm and <200 nm, and have been explored for various applications. This is a new technology that offers environmentally sustainable water solutions with a broad range of applications in a variety of industries.

Applications

  • Any Water Treatment plant from Municipal Drinking Water to Heavily Polluted Water
  • Wastewater Treatment Plants
  • River and Lakes Remediation
  • Destratication in Reservoirs and Large Water Bodies
  • Municipal Leachate Waste Treatment
  • Food Process Industry Wastewater
  • All forms of Aquaculture
  • Control Algae Outbreaks
Applications
Nanobubble

Key Benefits

Low energy usage, do more with less save up to 70% compared to other units
Odour reduction. Very rapidly the odour of the water body will clear to no smell.
No need to purchase bacteria or microbes to add to the water body – just let nature do its work
Rapid breakdown on surface scum in wastewater
Kevlar extensions available up to 20 metres for destratification
Uniform distribution of Dissolved Oxygen through the water body
Sized to suit your application. Floating and Manifold Units both available.
Can be designed to suit your specific need.
Strong circulation distributes Dissolved Oxygen throughout the water body both vertically and horizontally.
High mobility bubbles ensures optimal surface interface between contaminants and oxidants.
In aquaculture, aquatic life respiration is enhanced resulting in better growth rates.
Light Weight & Easily Serviced

MICROBUBBLE GENERATOR SPECIFICATIONS

Pump Rated Flow Rate m2/hr 3m2/hr Air Ratios 5:1
Water Flow Rate m2/day 72m2/day Air Volumes m2/hr 0.50M2/hr
Voltage(V) 36V Air Volumes kg/hr 0.65kg.hr
Power kW 0.35kW Oxygen Content 21.90% 0.1m2/hr
Amps 0.18A Oxygen Transfer Efficency (OTE) Air 82% 0.09m2/hr
Power Phase 1Ph Oxygen Transfer Efficency (OTE) Air g/hr 128g/hr
Solar Power Options No Oxygen Transfer Efficency (OTE) Air 95% 1.10m3/hr
Size of Unit mm H300 v W280 x D140 Oxygen Transfer Efficency (OTE) g/hr 149g/hr
Weight of Unit kg 7kg Gas Dissolving Rate 95%
Length of suction hose 2m Influential Water Volume Treated @82% m^3 0.05m^3
Length of delivery hose 3m DO Test Figures at 23C after 3minutes mg/l(Kunming) 31.91
Freight Size mm H400 v W380 x D240 DO Saturation Using Air up to 112%
Freigh Weight 8kg DO Retention Figures in Fresh Water 0.1-0.3 billion per ml after 3hours
Operating Temperature 0C – 50C DO Retention Figures in Pure Water 40-50 million per ml after 17hours
Suction Lift in metres   install above water level Yes
Bubble Diameter (nm/um) 0.25-30um Thermistor Required No
No of Bubbles per square ml Fresh Water 600-700million below 3 nanometres Ozone Equipment – can be supplied being ozone generator, dosing device, 45 litre tank and suction and delivery hoses
Bubble Quantity Based on Water Flow per Hour >98% Standard Ozone Volume 10g/hr
Bubble Retention Figures after 3 hours per ml Fresh Water >98% Maximum Ozone Volume 10g/hr
Rise Speed of Bubble 1.0cm/hr DO Saturation Using Ozone % >275%
Equipment Used Nanosight Particle Tracer Analyser DO Saturation mg/L >30mg/L

Pump Rated Flow Rate m2/hr 10m2/hr Air Ratios 5:1
Water Flow Rate m2/day 240m2/day Air Volumes m2/hr 1.7m2/hr
Voltage(V) 240V Air Volumes kg/hr 2.2kg/hr
Power kW 1.1kW Oxygen Content 21.90% 0.4m2/hr
Amps 4.0A Oxygen Transfer Efficency (OTE) Air 82% 0.31m2/hr
Power Phase 1Ph Oxygen Transfer Efficency (OTE) Air g/hr 436g/hr
Solar Power Options Yes Oxygen Transfer Efficency (OTE) Air 95% 0.35m3/hr
Size of Unit mm H700 v W600 x D350 Oxygen Transfer Efficency (OTE) g/hr 505g/hr
Weight of Unit kg 48kg Gas Dissolving Rate >95%
Length of suction hose 5m Influential Water Volume Treated @82% m^3 250m3/hr
Length of delivery hose 5m DO Test Figures at 23C after 3minutes mg/l(Kunming) 31.91
Freight Size mm H800 v W700 x D450 DO Saturation Using Air up to 112%
Freigh Weight 49kg DO Retention Figures in Fresh Water 0.1-0.3 billion per ml after 3hours
Operating Temperature -10oC – 50oC DO Retention Figures in Pure Water 40-50 million per ml after 17hours
Suction Lift in metres 1 install above water level Yes
Bubble Diameter (nm/um) 0.25-30um Thermistor Required No
No of Bubbles per square ml Fresh Water 600-700million below 3 nanometres Ozone Equipment – can be supplied being ozone generator, dosing device, 45 litre tank and suction and delivery hoses
Bubble Quantity Based on Water Flow per Hour >98% Standard Ozone Volume 10g/hr
Bubble Retention Figures after 3 hours per ml Fresh Water >98% Maximum Ozone Volume 10g/hr
Rise Speed of Bubble 1.0cm/hr DO Saturation Using Ozone % >275%
Equipment Used Nanosight Particle Tracer Analyser DO Saturation mg/L >30mg/L

Pump Rated Flow Rate m2/hr 20m2/hr Air Ratios 5:1
Water Flow Rate m2/day 480m2/day Air Volumes m2/hr 3.3m2/hr
Voltage(V) 380V Air Volumes kg/hr 4.27kg/hr
Power kW 3.0kW Oxygen Content 21.90% 0.723m2/hr
Amps 6.2A Oxygen Transfer Efficency (OTE) Air 82% 0.59m2/hr
Power Phase 3Ph Oxygen Transfer Efficency (OTE) Air g/hr 847g/hr
Solar Power Options Yes Oxygen Transfer Efficency (OTE) Air 95% 0.69m3/hr
Size of Unit mm H1350 v W1200 x D600 Oxygen Transfer Efficency (OTE) g/hr 981g/hr
Weight of Unit kg 168kg Gas Dissolving Rate >95%
Length of suction hose 5m Influential Water Volume Treated @82% m^3 5,0003/hr
Length of delivery hose 5m DO Test Figures at 23C after 3minutes mg/l(Kunming) 31.91
Freight Size mm H1450 v W1300 x D700 DO Saturation Using Air up to 112%
Freigh Weight 169kg DO Retention Figures in Fresh Water 0.1-0.3 billion per ml after 3hours
Operating Temperature -10oC – 50oC DO Retention Figures in Pure Water 40-50 million per ml after 17hours
Suction Lift in metres   install above water level Yes
Bubble Diameter (nm/um) 0.25-30um Thermistor Required Yes
No of Bubbles per square ml Fresh Water 600-700million below 3 nanometres Ozone Equipment – can be supplied being ozone generator, dosing device, 45 litre tank and suction and delivery hoses
Bubble Quantity Based on Water Flow per Hour >98% Standard Ozone Volume 20g/hr
Bubble Retention Figures after 3 hours per ml Fresh Water >98% Maximum Ozone Volume 50g/hr
Rise Speed of Bubble 1.0cm/hr DO Saturation Using Ozone % >275%
Equipment Used Nanosight Particle Tracer Analyser DO Saturation mg/L >30mg/L

Pump Rated Flow Rate m2/hr 30m2/hr Air Ratios 3:2
Water Flow Rate m2/day 1,440m2/day Air Volumes m2/hr 12.0m2/hr
Voltage(V) 380V Air Volumes kg/hr 15.5kg/hr
Power kW 5.5kW Oxygen Content 21.90% 2.628m2/hr
Amps 10.92A Oxygen Transfer Efficency (OTE) Air 82% 2.15m2/hr
Power Phase 3Ph Oxygen Transfer Efficency (OTE) Air g/hr 3.079g/hr
Solar Power Options Yes Oxygen Transfer Efficency (OTE) Air 95% 2.50m3/hr
Size of Unit mm H1510 v W1200 x D600 Oxygen Transfer Efficency (OTE) g/hr 3,568g/hr
Weight of Unit kg 235kg Gas Dissolving Rate >95%
Length of suction hose 5m Influential Water Volume Treated @82% m^3 10,0003/hr
Length of delivery hose 5m DO Test Figures at 23C after 3minutes mg/l(Kunming) 31.91
Freight Size mm H1610 v W1300 x D700 DO Saturation Using Air up to 112%
Freigh Weight 240kg DO Retention Figures in Fresh Water 0.1-0.3 billion per ml after 3hours
Operating Temperature -10oC – 50oC DO Retention Figures in Pure Water 40-50 million per ml after 17hours
Suction Lift in metres   install above water level Yes
Bubble Diameter (nm/um) 0.25-30um Thermistor Required Yes
No of Bubbles per square ml Fresh Water 600-700million below 3 nanometres Ozone Equipment – can be supplied being ozone generator, dosing device, 45 litre tank and suction and delivery hoses
Bubble Quantity Based on Water Flow per Hour >98% Standard Ozone Volume 20g/hr
Bubble Retention Figures after 3 hours per ml Fresh Water >98% Maximum Ozone Volume 100g/hr
Rise Speed of Bubble 1.0cm/hr DO Saturation Using Ozone % >275%
Equipment Used Nanosight Particle Tracer Analyser DO Saturation mg/L >30mg/L

Get a quotation today

Whatever your water or wastewater challenge, we can develop a solution for you.

Get a quote