
Appliance Water Conditioner – IGSAPP
Is suitable for a variety of appliances in your home such as washing machines, dishwashers and coffee machines. Simply install the IGSAPP water conditioner in the water line before the appliance, it only takes minutes and the benefits are fantastic! DN15 SS 316 Male/Female Threaded Ends Nominal Flow rate 9L/min
- Will last 20+ years when operated under normal conditions!
- Simple to install, no chemicals, no salts, no magnets.
- No electricity and no maintenance!

Fridge Water Conditioner – IGSFRIDGE
Is suitable for refrigerators with an ice maker/water dispensers. Simply install the IGSFRIDGE water conditioner in the water line before the appliance, it only takes minutes and the benefits are fantastic! DN15 SS 316 Male/Female Threaded Ends Nominal Flow rate 9L/min
- Will last 20+ years when operated under normal conditions!
- Simple to install, no chemicals, no salts, no magnets.
- No electricity and no maintenance!

Oven Water Conditioner – IGSOVEN
Is suitable for protecting your steam oven from hard water damage. Simply install the IGSOVEN water conditioner in the water line before the appliance, it only takes minutes and the benefits are fantastic! DN15 SS 316 Male/Female Threaded Ends Nominal Flow rate 9L/min
- Will last 20+ years when operated under normal conditions!
- Simple to install, no chemicals, no salts, no magnets.
- No electricity and no maintenance!

Pool Unit – IGSPOOL
Suitable for home or commercial swimming pools
If you live in a hard water area then you will have calcium, magnesium and sometimes iron in your water. Left untreated, scale will build up on the pool walls and tiles leaving your pump, filter, and chlorinator susceptible to hard water scaling problems that will cost you money. An even worse your pool pump fails prematurely or your salt water chlorinator cell builds up with scale reducing the efficiency of the chlorine generation, leading to problems of algae and black spot growing in the pool.
The solution is installing a catalytic IGS water Pool Conditioner. This ensures that each time the water is recirculated it gets conditioned time and time again. The quality and clarity of the water improves the more often the water is recirculated.
Installation
If you’re a handy person you can do the installation yourself. if not,
get your local pool guy to do the installation for you.
- The best location for the IGS pool conditioner is after the pump and either before the filter, or if you have a salt water chlorinator, after the filter and before the chlorinator.
- The IGS Pool conditioner will need to be glued in place so allow a couple of hours after the installation before turning the pool pump on again.
Installing the conditioner in the recirculating system means that each time the water is recirculated it gets conditioned time and time again.
- Will last 20+ years when operated under normal conditions!
- Simple to install, no chemicals, no salts, no magnets.
- No electricity and no maintenance!

Shower Water Conditioner – IGSSHOWER
Is suitable for any shower in your home, caravan or RV. Simply install the IGSSHOWER water conditioner on your hand held or fixed shower, it only takes minutes and the benefits are fantastic! DN15 SS 316 Male/Female Threaded Ends Nominal Flow rate 9L/min Box of 12
- Will last 20+ years when operated under normal conditions!
- Simple to install, no chemicals, no salts, no magnets.
- No electricity and no maintenance!

Flanged Unit – IGS20100
IGS Water Conditioner – IGS20100
Suitable for agricultural and commercial hard water applications, such as wells or bore water. Don’t spend all your profit margin buying in truck loads of water, condition the hard water so it is suitable for your needs. Stop equipment failure, and not only reduce, but remove scale build up in your equipment and treat the problem at the source. DN65 SS 316 65mm Table E Flanged Ends Ends Nominal Flow rate 335L/min Concentric reducers on inlet and outlet

Flanged Unit – IGS30000
IGS Water Conditioner – IGS30000
Suitable for agricultural and commercial hard water applications, such as wells or bore water. Don’t spend all your profit margin buying in truck loads of water, condition the hard water so it is suitable for your needs. Stop equipment failure, and not only reduce, but remove scale build up in your equipment and treat the problem at the source. DN80 SS 31680mm Table E Flanged Ends Nominal Flow rate 500L/min Concentric reducers on inlet and outlet

Flanged Unit – IGS54000
IGS Water Conditioner – IGS56000
Suitable for agricultural and commercial hard water applications, such as wells or bore water. Don’t spend all your profit margin buying in truck loads of water, condition the hard water so it is suitable for your needs. Stop equipment failure, and not only reduce, but remove scale build up in your equipment and treat the problem at the source. DN100 SS 316 100mm Table E Flanged Ends Nominal Flow rate 900L/min Concentric reducers on inlet and outlet

Flanged Unit – IGS96000
IGS Water Conditioner – IGS96000
Suitable for agricultural and commercial hard water applications, such as wells or bore water. Don’t spend all your profit margin buying in truck loads of water, condition the hard water so it is suitable for your needs. Stop equipment failure, and not only reduce, but remove scale build up in your equipment and treat the problem at the source. DN125 SS 125mm 316 Table E Flanged Ends Nominal Flow rate 1600L/min Concentric reducers on inlet and outlet

Flanged Unit – IGS170400
IGS Water Conditioner – IGS170400
Suitable for agricultural and commercial hard water applications, such as wells or bore water. Don’t spend all your profit margin buying in truck loads of water, condition the hard water so it is suitable for your needs. Stop equipment failure, and not only reduce, but remove scale build up in your equipment and treat the problem at the source. DN150 SS 150mm 316 Table E Flanged Ends Nominal Flow rate 2840L/min Concentric reducers on inlet and outlet

Flanged Unit – IGS240000
IGS Water Conditioner – IGS240000
Suitable for agricultural and commercial hard water applications, such as wells or bore water. Don’t spend all your profit margin buying in truck loads of water, condition the hard water so it is suitable for your needs. Stop equipment failure, and not only reduce, but remove scale build up in your equipment and treat the problem at the source. DN200 SS 200mm 316 Table E Flanged Ends Nominal Flow rate 4000L/min Concentric reducers on inlet and outlet

Flanged Unit – IGS324000
IGS Water Conditioner – IGS324000
Suitable for agricultural and commercial hard water applications, such as wells or bore water. Don’t spend all your profit margin buying in truck loads of water, condition the hard water so it is suitable for your needs. Stop equipment failure, and not only reduce, but remove scale build up in your equipment and treat the problem at the source. DN200 SS 200mm 316 Table E Flanged Ends Nominal Flow rate 4000L/min Concentric reducers on inlet and outlet

Short Flanged Unit – IGS20100S
IGS Water Conditioner – IGS20100S
Suitable for agricultural and commercial hard water applications, such as wells or bore water. Don’t spend all your profit margin buying in truck loads of water, condition the hard water so it is suitable for your needs. Stop equipment failure, and not only reduce, but remove scale build up in your equipment and treat the problem at the source. DN65 SS 316 65mm Table E Flanged Ends Ends Nominal Flow rate 335L/min Concentric reducers on inlet and outlet

Short Flanged Unit – IGS30000S
IGS Water Conditioner – IGS30000S
Suitable for agricultural and commercial hard water applications, such as wells or bore water. Don’t spend all your profit margin buying in truck loads of water, condition the hard water so it is suitable for your needs. Stop equipment failure, and not only reduce, but remove scale build up in your equipment and treat the problem at the source. DN80 SS 31680mm Table E Flanged Ends Nominal Flow rate 500L/min Concentric reducers on inlet and outlet

Short Flanged Unit – IGS54000S
IGS Water Conditioner – IGS54000S
Suitable for agricultural and commercial hard water applications, such as wells or bore water. Don’t spend all your profit margin buying in truck loads of water, condition the hard water so it is suitable for your needs. Stop equipment failure, and not only reduce, but remove scale build up in your equipment and treat the problem at the source. DN100 SS 316 100mm Table E Flanged Ends Nominal Flow rate 900L/min Concentric reducers on inlet and outlet

Short Flanged Unit – IGS96000S
IGS Water Conditioner – IGS96000S
Suitable for agricultural and commercial hard water applications, such as wells or bore water. Don’t spend all your profit margin buying in truck loads of water, condition the hard water so it is suitable for your needs. Stop equipment failure, and not only reduce, but remove scale build up in your equipment and treat the problem at the source. DN125 SS 125mm 316 Table E Flanged Ends Nominal Flow rate 1600L/min Concentric reducers on inlet and outlet

Short Flanged Unit – IGS17040S
IGS Water Conditioner – Short Flanged Unit – IGS17040S
Suitable for agricultural and commercial hard water applications, such as wells or bore water. Don’t spend all your profit margin buying in truck loads of water, condition the hard water so it is suitable for your needs. Stop equipment failure, and not only reduce, but remove scale build up in your equipment and treat the problem at the source. DN150 SS 150mm 316 Table E Flanged Ends Nominal Flow rate 2840L/min Concentric reducers on inlet and outlet

Short Flanged Unit – IGS240000S
IGS Water Conditioner – IGS240000S
Suitable for agricultural and commercial hard water applications, such as wells or bore water. Don’t spend all your profit margin buying in truck loads of water, condition the hard water so it is suitable for your needs. Stop equipment failure, and not only reduce, but remove scale build up in your equipment and treat the problem at the source. DN200 SS 200mm 316 Table E Flanged Ends Nominal Flow rate 4000L/min Concentric reducers on inlet and outlet

Short Flanged Unit – IGS324000S
IGS Water Conditioner – IGS324000S
Suitable for agricultural and commercial hard water applications, such as wells or bore water. Don’t spend all your profit margin buying in truck loads of water, condition the hard water so it is suitable for your needs. Stop equipment failure, and not only reduce, but remove scale build up in your equipment and treat the problem at the source. DN200 SS 200mm 316 Table E Flanged Ends Nominal Flow rate 4000L/min Concentric reducers on inlet and outlet

Female Header Unit – IGS1080
IGS Water Conditioner IGS1080
Residential and caravan protection, small to medium sized homes with town water supply or water tank with pump, 1 bathroom, 1 laundry and 1 kitchen.
Prevent scaling of pipes and appliances, reduced foaming and cleaning abilities of soaps and detergents, soap scum in sinks and bathtubs, scum rings in bath tubs.
DN20 (3/4″/20mm) SS 316 Female Threaded Ends BSPT Thread Nominal Flow rate 18L/min

Female Header Unit – IGS13200
IGS Water Conditioner IGS13200
Commercial and agricultural applications. Treat hard water problems at the source, prevent scaling of pipes and appliance and grow better crops. Prevent calcium carbonate scaling, reduce iron staining problems, reduce operating costs, reduce down time, reduces maintenance costs and protects your equipment. DN20 (2″/50mm) SS 316 Female Threaded Ends BSPT Thread Nominal Flow rate 220L/min

Female Header Unit – IGS2040
IGS Water Conditioner IGS2040
Residential and caravan protection, medium sized homes with town water supply or water tank with pump, 2-3 bathrooms, 1 laundry and 1 kitchen. Prevent scaling of pipes and appliances, reduced foaming and cleaning abilities of soaps and detergents, soap scum in sinks and bathtubs, scum rings in bath tubs.

Female Header Unit – IGS300
IGS Water Conditioner IGS300
Suitable for under sink filtration systems in your home, caravan or RV. DN15 (1/2″/15mm) SS 316 Female Threaded Ends BSP thread Nominal Flow rate 5L/min

Female Header Unit – IGS3360
IGS Water Conditioner IGS3360
Residential and caravan protection, large homes with town water supply or water tank with pump, 4-5 bathrooms, 1 laundry and kitchen. Prevent scaling of pipes and appliances, reduced foaming and cleaning abilities of soaps and detergents, soap scum in sinks and bathtubs, scum rings in bath tubs. DN20 (1″/25mm) SS 316 Female Threaded Ends BSPT Thread Nominal Flow rate 56L/min

Female Header Unit – IGS540
IGS Water Conditioner IGS540
Suitable for under sink filtration systems in your home, caravan or RV. DN15 (1/2″/15mm) SS 316 Female Threaded Ends BSP threadNominal Flow rate 9L/min

Female Header Unit – IGS6000
IGS Water Conditioner IGS6000
Commercial and agricultural applications. Treat hard water problems at the source, prevent scaling of pipes and appliance and grow better crops. Prevent calcium carbonate scaling, reduce iron staining problems, reduce operating costs, reduce down time, reduces maintenance costs and protects your equipment. DN50 (2″/50mm) SS 316 Female Threaded Ends BSPT Thread Nominal Flow rate 100L/min

Female Header Unit- IGS720
IGS Water Conditioner IGS720
Suitable for under sink filtration systems in your home, caravan or RV. DN15 (1/2″/15mm) SS 316 Female Threaded Ends BSP threadNominal Flow rate 12L/min

Pool Unit – IGSPOOL
Suitable for home or commercial swimming pools
If you live in a hard water area then you will have calcium, magnesium and sometimes iron in your water. Left untreated, scale will build up on the pool walls and tiles leaving your pump, filter, and chlorinator susceptible to hard water scaling problems that will cost you money. An even worse your pool pump fails prematurely or your salt water chlorinator cell builds up with scale reducing the efficiency of the chlorine generation, leading to problems of algae and black spot growing in the pool.
The solution is installing a catalytic IGS water Pool Conditioner. This ensures that each time the water is recirculated it gets conditioned time and time again. The quality and clarity of the water improves the more often the water is recirculated.
Installation
If you’re a handy person you can do the installation yourself. if not,
get your local pool guy to do the installation for you.
- The best location for the IGS pool conditioner is after the pump and either before the filter, or if you have a salt water chlorinator, after the filter and before the chlorinator.
- The IGS Pool conditioner will need to be glued in place so allow a couple of hours after the installation before turning the pool pump on again.
Installing the conditioner in the recirculating system means that each time the water is recirculated it gets conditioned time and time again.
- Will last 20+ years when operated under normal conditions!
- Simple to install, no chemicals, no salts, no magnets.
- No electricity and no maintenance!

Male Header Unit – IGS1080M
IGS Water Conditioner IGS1080M
Residential and caravan protection, small to medium sized homes with town water supply or water tank with pump, 1 bathroom, 1 laundry and 1 kitchen. Prevent scaling of pipes and appliances, reduced foaming and cleaning abilities of soaps and detergents, soap scum in sinks and bathtubs, scum rings in bath tubs. DN25 (1″/25mm) SS 304 Male Threaded Ends BSP Thread Nominal Flow rate 18L/min
- Will last 20+ years when operated under normal conditions!
- Simple to install, no chemicals, no salts, no magnets.
- No electricity and no maintenance!

Male Header Unit – IGS13200M
IGS Water Conditioner IGS13200M
Commercial and agricultural applications. Treat hard water problems at the source, prevent scaling of pipes and appliance and grow better crops. Prevent calcium carbonate scaling, reduce iron staining problems, reduce operating costs, reduce down time, reduces maintenance costs and protects your equipment. DN50 (2″/50mm) SS 304 Male Threaded Ends Nominal Flow rate 220L/min

Male Header Unit – IGS2040M
IGS Water Conditioner IGS2040M
Residential and caravan protection, small to medium sized homes with town water supply or water tank with pump, 2-3 bathrooms, 1 laundry and 1 kitchen. Prevent scaling of pipes and appliances, reduced foaming and cleaning abilities of soaps and detergents, soap scum in sinks and bathtubs, scum rings in bath tubs. DN25 (1″/25mm)SS 304 Male Threaded Ends BSP Thread Nominal Flow rate 34L/min

Male Header Unit – IGS3360M
IGS Water Conditioner IGS3360M
Residential and caravan protection, small to medium sized homes with town water supply or water tank with pump, 4-5 bathrooms, 1 laundry and kitchen. Prevent scaling of pipes and appliances, reduced foaming and cleaning abilities of soaps and detergents, soap scum in sinks and bathtubs, scum rings in bath tubs. DN25 (1″/25mm) SS 304 Male Threaded Ends BSP Thread Nominal Flow rate 56L/min

Male Header Unit – IGS540M
IGS Water Conditioner IGS540M
Suitable for under sink filtration systems in your home, caravan or RV. DN20 (3/4″/20mm) SS 304 Male Threaded Ends BSP Thread Nominal Flow rate 9L/min

Male Header Unit – IGS6000M
IGS Water Conditioner IGS6000M
Commercial and agricultural applications. Treat hard water problems at the source, prevent scaling of pipes and appliance and grow better crops. Prevent calcium carbonate scaling, reduce iron staining problems, reduce operating costs, reduce down time, reduces maintenance costs and protects your equipment. DN50 (2″/50mm) SS 316 Male Threaded Ends Nominal Flow rate 100L/min

Male Header Unit – IGS720M
IGS Water Conditioner IGS720M
Suitable for under sink filtration systems in your home, caravan or RV. DN20 (3/4″/20mm) SS 304 Male Threaded Ends BSP Thread Nominal Flow rate 12L/min

Pool Unit – IGSPOOL
Suitable for home or commercial swimming pools
If you live in a hard water area then you will have calcium, magnesium and sometimes iron in your water. Left untreated, scale will build up on the pool walls and tiles leaving your pump, filter, and chlorinator susceptible to hard water scaling problems that will cost you money. An even worse your pool pump fails prematurely or your salt water chlorinator cell builds up with scale reducing the efficiency of the chlorine generation, leading to problems of algae and black spot growing in the pool.
The solution is installing a catalytic IGS water Pool Conditioner. This ensures that each time the water is recirculated it gets conditioned time and time again. The quality and clarity of the water improves the more often the water is recirculated.
Installation
If you’re a handy person you can do the installation yourself. if not,
get your local pool guy to do the installation for you.
- The best location for the IGS pool conditioner is after the pump and either before the filter, or if you have a salt water chlorinator, after the filter and before the chlorinator.
- The IGS Pool conditioner will need to be glued in place so allow a couple of hours after the installation before turning the pool pump on again.
Installing the conditioner in the recirculating system means that each time the water is recirculated it gets conditioned time and time again.
- Will last 20+ years when operated under normal conditions!
- Simple to install, no chemicals, no salts, no magnets.
- No electricity and no maintenance!